1967-72 Chevy C/K - Truck 4-Row Copper Brass Radiator
Our dual-cross flow ’73-’87 Chevrolet C10 radiator equipped with integrated heat exchanger/air to water charge air cooler for supercharger is offered for LT applications (Also offered in LS applications.) Our heat exchanger allows you to eliminate the extra space needed to house an auxiliary cooler and extra fans, saving hours of labor and your pocket. Not only is our radiator saving you space - it will provide your electrical system a much-needed break while saving you money in the process. Our integrated cooler provides 53% more cooling than the standard Corvette Z06 heat exchanger.
Slight modification to your core support on the bottom may be required - please see attached PDF instructions HERE
**REQUIRES BIG BLOCK MOUNTS AND RUBBER PADS
SITS IN STOCK LOCATION
4-row brass tubes, 2.875" thick core
Brass 1/4" NPT drain cock
Bung size - 1/2 NPT
15-18lb cap recommended
APPLICATIONS AVAILABLE FOR:
LT4 - TOP INLET 1.250" RIGHT, BOTTOM OUTLET 1.250" RIGHT
$50 UPCHARGE TO MOVE/CHANGE HOSE SIZE CONNECTION - CUSTOM ORDERED BY PHONE ONLY
1967-72 Chevy Truck 4-Row Radiator w/ Heat Exchanger for LT4
40% MORE THERMAL COOLING EFFICIENCY OVER ALUMINUM
4 ROW, 2 ¾ inch THICK - COPPER CORE
Direct fit, bolt-in install w/ no modifications to core support, grille or grille shell
Brass tubes made in-house, .125 in. x 0.5 in.
1-piece top tanks stamped from .040 deep draw brass
Pre-drawn heavy 12 Ga. Steel rod holder with threaded holes for all attachments (where needed) for pre 40’s cars/trucks.
Quality control start to finish from raw material to finished product
USA made - manufactured in-house, built with original tooling
Heavy gauge steel side brackets w/ pre-drilled holes where needed
Designed to operate with a 15-18 lb. radiator cap *(Exclusion of Flathead application 7 lb. cap recommended
Brass drain cock ¼ inch NPT
Heater Hose and Heat Exchanger bung both ½ NPT (only certain applications)
Automatic transmission cooler built-in (optional for $100) - line connection 1/8 in. NPT
Standard ‘T’ 6” centerline Trans cooler line connection 1/8-27 NPT
‘T1’ 12” centerline Trans cooler line ½-20 UNF
GUARANTEED TO COOL-GUARANTEED TO FIT
Air Condition Models:
Condenser compatible for use with freon R-12 and R-134a refrigerant
Easy condenser-to-compressor-evaporator hook ups
Condenser fitting sizes are #6 and #8 O-ring designs